Invacare® Storm®⁴
Disengaging the motor:
1.
Switch off remote.
2.
Pull the engaging lever (1) upwards.
The motor is disengaged.
Engaging the motor:
1.
Push the engaging lever down (1).
The motor is engaged. Please note that both motors must always
be engaged before driving!
5.7.2
Disengaging the motors (GB motors)
CAUTION!
Risk of injury from hot motor surfaces
–
Avoid touching the motor surfaces when engaging or
disengaging.
CAUTION!
Risk of the mobility device running away
–
When the motors are disengaged (for push operation
whilst freewheeling), the electromagnetic motor
brakes are deactivated. When the mobility device is
parked, the levers for engaging and disengaging the
motors must without fail be locked firmly into the
"DRIVE" position (electromagnetic motor brakes
activated).
NOTE
–
The motors may only be disengaged by an attendant,
not by the user.
–
This ensures that the motors are only disengaged if an
attendant is available to secure the mobility device and
prevent unintended rolling.
Each motor is fitted with an engaging lever which is used to engage
or disengage the motor.
Disengaging the motor:
1.
Switch off remote.
2.
Pull the locking pin
A
out and the engaging lever
B
to the rear.
The motor is now disengaged.
28
1529686-P
