Adjusting the mobility device to the user's seating posture
Requirements:
•
Allen key 8 mm
1.
Loosen screw (1).
2.
Adjust armrest to required position.
3.
Retighten the screw.
4.
Repeat this procedure for the second armrest.
6.4
Adjustment options for parallel sliding
armrests
6.4.1
Setting the height of the parallel sliding
armrests
The height of the parallel sliding armrest is set using the armrest angle.
1.
Release the knob to adjust the armrest angle (1).
2.
Set the angle for the armrest.
3.
Retighten the knob.
After adjusting the armrest height, the angle of the armpad needs to
be adjusted. Refer to 6.4.2 Adjusting the angle of the armpad on the
parallel sliding armrests, page 33.
6.4.2
Adjusting the angle of the armpad on the
parallel sliding armrests
Requirements:
•
Allen key 5 mm
1529686-P
33
