Invacare® Storm®⁴
3.
Set the desired angle.
4.
Turn the knob clockwise to tighten it.
7.4.3
Setting the end stop of the legrest
Requirements:
•
1 x 10 mm open-ended spanner
1.
The end position of the legrest is determined by means of a
rubber stop (1).
2.
The rubber stop can be screwed in or out
A
or pushed up or
down
B
.
3.
Loosen the locking knob (1) counter-clockwise at least one turn.
64
1529686-P
