Transport
Removing the batteries:
1.
Make the batteries accessible as described in chapter 10.4.2
Making the batteries accessible, page 91.
2.
Remove the pole caps (1) from the accessible battery (3).
3.
Remove the pole screws located under the pole caps using an
11-mm socket spanner.
4.
Remove the connection cable (4) and the fuse cable (2).
5.
Lift the battery from the battery carrier.
6.
Pull the second battery forward using its strap.
7.
Disconnect the cables of the second battery as well.
8.
Lift the second battery from the battery carrier.
Fitting the batteries:
1.
Fit the batteries in the reverse order.
2.
Ensure that the connectors and sockets in the battery
compartment are fitted correctly. There is a polarity diagram
in the rear cover.
1529686-P
93
