Invacare
®
- STORM
4
MAX
SERVICE MANUAL
105
8.14.6 Replacing the tilt actuator
Requirements:
•
Oblique pliers
•
Cable ties
Dismantling the tilt actuator:
•
Remove the l
•
egrests.
•
Pull the tilt actuator plug out of the actuator module under the seat
•
Unclip the cable. Remove any cable ties which are fitted.
•
Remove the upper pin retainer (1).
•
Remove the upper bolt (2).
•
Swing the tilt actuator (6) forwards.
•
Remove the lower pin retainer (5).
•
Remove the lower pin (4) and remove the entire tilt actuator.
•
Replace the tilt actuator.
Refitting the tilt module:
•
Refit the parts later in reverse order.
•
To conclude, check all the mobility aid functions.
