Invacare
®
- STORM
4
MAX
SERVICE MANUAL
49
8.2.5
Replacing the G-Trac sensor
Requirements:
•
5 mm Allen key
•
10 mm socket wrench
Uninstalling the G-Trac sensor:
•
Remove the seat, as described in chapters 8.14.1 and 8.14.5.
•
Switch the electronics of the wheelchair OFF.
•
Remove the rear cover, as described in chapter 8.1.1.
•
Take note of the positions of all cables and the sockets that they are connected to. Mark the
connectors and sockets or take a photograph with a digital camera.
•
In the illustration above, you see the power module (3) and the positions of the optional lighting
circuit board (2), of the optional actuator module (1) and of the optional G-Trac sensor (4).
•
Remove the rear cover, as described in chapter 8.1.1.
•
Press both locking bolts inwards and open the battery box cover.
