SERVICE MANUAL
Invacare
®
- STORM
4
MAX
62
8.6.1
Cable routing
Requirements:
•
4 mm Allen key
•
oblique pliers
•
cable ties
•
Remove the rear and the centre cover as described in chapters 8.1.1 and 8.1.2 .
•
Guide the cables inside of the cover over the cable link (1).
•
Secure the cables with the cable clamps (2).
•
The motor cables are fitted with protection covers (2) and are guided out of the front cover
through recesses on the side.
•
Cables that lead to the seat (upper actuator module, remote, headlight), are guided out of the
front cover through an upper left recess (3).
•
Make sure the cable has enough play so that all movable parts can move freely without
stretching, clamping or abrading the cable.
•
Lay the cables in the same way under the seat and to the remote. Fasten the cables with the
prescribed cable clamps or cable ties respectively.
