SERVICE MANUAL
Invacare
®
- STORM
4
MAX
8
1
Introduction
1.1
General information
•
Service and maintenance work must be carried out taking this service manual into account.
•
It is imperative that you observe safety information.
•
Information about operation or about general maintenance and care work on the mobility aid
should be taken from the operating manual.
•
You can find information about ordering spare parts in the spare parts catalogue.
•
Only use original Invacare® spare parts. The guarantee will become invalid if other spare parts
are used!
•
We reserve the right to make any alterations on the grounds of technical improvements.
•
The mobility aid may only be maintained and overhauled by qualified personnel.
•
The minimum requirement for service technicians is suitable training, such as in the cycle or
orthopaedic mechanics fields, or sufficiently long-term job experience.
- Experience in the use of electrical measuring equipment (multimeters) is also a requirement.
- Special Invacare® training is recommended.
•
Alterations to the mobility aid which occur as a result of incorrectly or improperly executed
maintenance or overhaul work lead to the exclusion of all liability on the side of INVACARE.
•
If you have any problems or questions please contact Invacare® Service.
1.2
Notes on transport
•
If the mobility aid has to be shipped back to the manufacturer for major repairs, you should
always use the original packaging for transport.
•
Please attach a precise description of the fault.