Part No. 1114809
47
TDX WHEELCHAIRS
This Section Includes the Following:
Installing/Removing Flip Back Armrests
Adjusting Flip Back Armrests
WARNING
After ANY adjustments, repair or service and BEFORE use, make sure that
all attaching hardware is tightened securely - otherwise injury or damage
may result.
INSTALLING/REMOVING FLIP BACK ARMRESTS (FIGURE 1)
WARNING
Make sure the flip back armrest release and height adjustment levers are in
the locked position before using the wheelchair.
NOTE: Flip back armrest release lever must be in the unlocked (UP- HORIZONTAL) position when
placing the armrest into the arm sockets.
INSTALLING
1. Visually inspect to ensure flip back
armrest release lever is in the un-
locked HORIZONTAL position.
2. Slide the flip back armrest into the arm
sockets on the seat frame.
3. Install the quick release pin through
the rear arm socket and flip back
armrest.
4. Lock the flip back armrest by pressing
the flip back armrest release lever into
the VERTICAL position.
5. Repeat STEPS 1-4
for the opposite flip
back armrest.
REMOVING
1. Unlock the flip back armrest by posi-
tioning the flip back armrest release
lever into the HORIZONTAL position.
2. Remove the quick release pin that
secures the flip back armrest to the
rear arm socket.
3. Pull up on the flip back armrest and
remove the armrest from the arm sockets.
4. Repeat STEPS 1-3
for the opposite flip back armrest, if necessary.
ARMS
ARMS
FIGURE 1 - INSTALLING/REMOVING
FLIP BACK ARMRESTS
Rear
Arm
Socket
Quick Release
Pin
LOCKED
(VERTICAL)
UNLOCKED
(HORIZONTAL)
Flip Back Armrest Release
Lever
Flip Back Armrest
Seat
Frame
Front Arm
Socket
SECTION 5
All manuals and user guides at all-guides.com
