•
Follow this procedure for moving the wheelchair
between floors when an elevator is NOT available:
1.
If stairway or escalator is only means of access,
remove occupant of wheelchair and transport user
and wheelchair separately.
2.
Invacare recommends using two attendants
and making thorough preparations prior to
transportation.
3.
Ensure that only secure, non-detachable parts are
used for hand-hold supports.
4.
Use safe lifting techniques.
5.
Remove the batteries from wheelchair. Refer to
7.2.12 Removing the Batteries from the Wheelchair,
page 50
6.
Using non-removable (non-detachable) parts of the
wheelchair, lift the wheelchair off of the ground
and transfer the wheelchair up or down the stairs.
7.
The wheelchair should not be lowered until the last
stair has been negotiated and the wheelchair has
been carried away from the stairway.
2.1.3 Repair and Service Information — Providers and/or
Qualified Technicians
DANGER!
Risk of Injury, Damage or Death
Improper setup, service, adjustment or
programming may cause injury, damage or death.
– Qualified technician MUST setup, service and
program the wheelchair.
– DO NOT allow non-qualified individuals to
perform any work or adjustments on the
wheelchair.
– DO NOT setup or service the wheelchair while
occupied except for programming or unless
otherwise noted.
– Turn off power BEFORE adjusting or servicing
the wheelchair. Note that some safety features
will be disabled.
– Ensure all hardware is securely tightened after
setup, service or adjustments.
– Warranty is void if non-qualified individuals
perform any work on this product.
60101877-B
13
Summary of Contents for TDX SP2 series
Page 86: ...Notes...
Page 87: ...Notes...
