Invacare® TDX® SP2 Series
WARNING!
Risk of Injury
Pinch points can cause injury.
– Be aware that a pinch point
A
exists between
the head tube cap and walking beam.
– Be aware that a pinch point
B
exists
between the walking beam/head tube cap and
telescoping tube when the wheelchair is at the
lowest seat to floor height.
– Be aware that a pinch point
C
may occur
when rotating the center mount front rigging
assembly.
Fig. 2-12 Pinch Points — Head
Tube Cap/Walking Beam and
Telescoping Tube
Fig. 2-13 Pinch Points — Center
Mount Front Rigging
2.6 Footplates and Front Rigging
WARNING!
Risk of Serious Injury or Damage
Operating the wheelchair with a clearance of less
than 75 mm (3 inches) between the footplates
and the ground/floor may cause serious injury or
property damage.
– ALWAYS maintain a minimum of 75 mm (3
inches) between the bottom of the footplates
and ground/floor to ensure proper clearance
while the wheelchair is in motion. If necessary,
adjust the footplates height to achieve proper
clearance. After footplates height adjustment, if
the wheelchair dips forward and the footplates
touch the ground while in motion, please
contact your provider for an inspection and
avoid use of the wheelchair if possible.
2.7 Storage
WARNING!
Risk of Injury, Damage or Death
Storage or use near heat sources and combustible
products may result in injury or damage.
– DO NOT store or use wheelchair near open
flames or other heat sources.
– DO NOT store or use wheelchair near
combustible products.
24
60101877-B
Summary of Contents for TDX SP2 series
Page 86: ...Notes...
Page 87: ...Notes...
