1.
Turn off the wheelchair power.
2.
Perform one of the following as if viewing the motors
from behind the wheelchair (Detail “A”):
•
Disengage (PUSH) - Move the motor lock levers UP
to disengage the motors and push the wheelchair.
•
Engage (DRIVE) - Move the motor lock levers DOWN
to engage the motors and drive the wheelchair.
6.2 Disengaging/Engaging the Wheel locks
WARNING!
Risk of Injury or Damage
Misuse of wheel locks may result in injury or
damage.
– DO NOT attempt to stop a moving wheelchair
with the wheel locks. Wheel locks are not
brakes.
– DO NOT use the wheel locks (if equipped)
when the wheelchair power is on. Invacare
recommends the use of wheel locks.
Use the wheel locks to hold the wheelchair in place
whenever the clutches are disengaged.
Fig. 6-2
6.2.1 Engaging
1.
Push handle
A
forward
C
away from tire
B
to engage
wheel lock
D
.
2.
Repeat STEP 1 for opposite wheel.
6.2.2 Disengaging
1.
Pull handle
A
back
E
toward tire
B
to disengage
wheel lock
D
.
2.
Repeat STEP 1 for opposite wheel.
60101877-B
41
Summary of Contents for TDX SP2 series
Page 86: ...Notes...
Page 87: ...Notes...
