8.8 Securing the Occupant
8.8.1 Wheelchair-Anchored Belts
WARNING!
Risk of Injury, Damage or Death
Lack or improper use of wheelchair transport
systems may result in injury, damage or death.
–
Use both pelvic and upper torso belts.
–
The pelvic belt that is provided by Invacare
has been tested for use in a motor vehicle on
this wheelchair only. Do not replace the pelvic
belt with a different style pelvic belt.
The wheelchair has been provided with a pelvic belt which
meets the requirements of ANSI/RESNA WC/19.
The pelvic belt provided by Invacare has been designed to
accommodate use on either side of the vehicle.
1.
Install the pelvic belt pin
A
into large end of slot
B
in
the belt mounting bracket
C
. Pull upwards until it snaps
into place. Rotate downward and forward until it snaps
into place into the small end of the slot.
There are two pin locations
E
on the pelvic belt
that are used to secure the vehicle-anchored
torso belt.
2.
Repeat step 1 for the opposite belt mounting bracket.
3.
Install the vehicle-anchored upper torso belt onto the
two pin
E
locations on the pelvic belt.
60101877-B
61
Summary of Contents for TDX SP2 series
Page 86: ...Notes...
Page 87: ...Notes...