Invacare® Top End®
Detail “E”
Fig. 10-11
Replace
1.
Put the end of the compensator cylinder in place on the
clamp (Figure 10–7).
2.
Put the screw into the mounting hole on the clamp
(Figure 10–8).
3.
Put a nut on the end of the screw and tighten securely
with an Allen wrench (Figure 10–9).
4.
Put the opposite end of the compensator cylinder in
place on the track control steering mechanism and
attach with a screw and nut (Figure 10–10). Tighten
securely with an Allen wrench.
The racing wheelchair should be aligned straight
after assembly. Refer to Figure 10–11. The clamp
can be moved on the fork if necessary.
46
60001470-A
