6 WHEELS
Part No 1171801
46
Invacare® Top End® Everyday Series
6 Wheels
6.1
Removing/Installing Rear Wheels
1.
Perform one of the following:
•
Quick-Release - Push in the tip of the quick-release axle and
pull axle and wheel away from the wheelchair.
•
Quad-Release - Lift up on the handle of the quad-release axle
and pull axle and wheel away from the wheelchair.
2.
Repeat STEP 1 for the opposite wheel.
3.
Install both rear wheels by reversing STEPS 1-2.
4.
If there is too much movement of the rear wheel assembly in a back
and forth motion, refer to
WARNING
After any adjustments, repair or service and before use, make sure all attaching hardware is tightened securely. Otherwise injury or
damage may occur.
CAUTION
Changing the size of the rear wheels can affect the performance of the wheelchair. Contact Top End at the telephone
number on the back of this manual before changing rear wheel size.
WARNING
Pull on the rear wheel to make sure the detent pin and
locking pins of the quick/quad-release axle are fully
released before operating the wheelchair.
Keep locking pins clean.
Wheelchair Frame
Rear Wheel
Locking Pins
Quick-Release
Axle
Detent Pin
Quad-Release Axle not shown. Locking pins on the
Quad-Release Axle are the same as Quick-Release Axle.
Summary of Contents for Top End Everyday Series
