Service
1.
Remove or fold down the back. Refer to 4.1 Unfolding/Folding
the Back, page 24.
2.
Insert mounting bolt
A
into the mounting hole
B
at the desired
height on the swingaway padded armrest socket
C
and secure
with the locknut.
3.
Install the swingaway padded armrest
D
. Refer to 5.3
Installing/Removing/Adjusting the Swingaway Padded Armrest,
page 50
4.
Attach the left and right swingaway arm mounting hardware
E
to the swingaway padded armrest sockets
C
using the four
mounting screws and locknuts
F
. Tighten securely.
5.
Insert the mounting screw
A
through the lock-down folding
back latch
B
and the swingaway arm mounting hardware (not
shown). Tighten securely.
6.
Attach the wheelchair frame
C
to the lock-down folding back
latch
B
using the spring pin assembly
D
.
7.
Attach backframe
E
to the lock-down folding back latch
B
using
the two mounting screws and locknuts
F
.
8.
Install or unfold the back. Refer to 4.1 Unfolding/Folding the
Back, page 24.
1171801-A
49
