Part No. 1052712 Rev D
11
Terminator SS
Reaching, Leaning and Bending - Forward.
Position the front casters so that they are
extended as far forward as possible and
engage wheel locks.
WARNING
DO NOT attempt to reach objects
if you have to move forward in the
seat or pick them up from the floor
by reaching down between your
knees.
Reaching, Leaning - Backwards.
WARNING
DO NOT lean over the top of the
back upholstery. This will change
your center of gravity and may
cause you to tip over.
REACHING, LEANING AND
BENDING - FORWARD
REACHING, LEANING -
BACKWARDS
GENERAL GUIDELINES
SECTION 1
GENERAL
GUIDELINES
TIPPING
WARNING
DO NOT tip the wheelchair without assistance.
DO NOT let the wheelchair drop the last few inches to the ground.
This could result in injury to the occupant.
When tipping the wheelchair, an assistant should grasp the back of the wheelchair on a
non-removable (non-detachable) part. Inform the wheelchair occupant before tilting the
wheelchair and remind him/her to lean back. Be sure the occupants feet and hands are
clear of all wheels and/or pinch points. Apply a continuous motion until the balance
point is achieved. At this point, the assistant will feel a difference in the weight
distribution. Turn the wheelchair in the desired direction if necessary. Slowly lower the
wheelchair in one continuous movement.
All manuals and user guides at all-guides.com
all-guides.com
