Part No. 1052712 Rev D
13
Terminator SS
Follow this procedure for moving the wheelchair between floors when an elevator is
NOT available:
1. If equipped, turn the anti-tippers UP. Refer to SECTION 6
in this manual.
2. After the wheelchair has been tilted back to the balance point, one assistant (in the
rear) backs the wheelchair up against the first step, while securely grasping a non-
removable (non-detachable) part of the wheelchair for leverage.
3. The second assistant, with a firm hold on a non-detachable part of the framework,
lifts the wheelchair up and over the stair and steadies it as the first assistant places
one foot on the next stair and repeats procedure.
4. The wheelchair should not be lowered until the last stair has been negotiated and it
has been rolled away from the stairway.
5. If equipped, turn the anti-tippers DOWN. Refer to SECTION 6
in this manual.
ESCALATORS? SORRY!
DO NOT use an escalator to move a wheelchair between floors. Serious
bodily injury may occur.
TRANSFERRING TO AND FROM OTHER SEATS
WARNING
BEFORE attempting to transfer in or out of the wheelchair, every precaution
should be taken to reduce the gap distance. Turn both casters parallel to the
object you are transferring onto. Also be certain the wheel locks are engaged
to help prevent the wheels from moving.
CAUTION
When transferring, position yourself as far back as possible in the seat. This
will prevent damaged upholstery and the possibility of the wheelchair
tipping forward.
NOTE: This activity may be performed independently provided you have adequate mobility and
upper body strength.
Position the wheelchair as close as
possible along side the seat to which you
are transferring, with the front casters
parallel to it. Remove the armrest, if
installed. Engage wheel locks. Shift body
weight into seat with transfer.
During independent transfer, little or no
seat platform will be beneath you. Use a
transfer board if at all possible.
GENERAL GUIDELINES
SECTION 1
GENERAL
GUIDELINES
All manuals and user guides at all-guides.com
