Safety
2.1.1 Set Up
DANGER!
Risk of Death, Serious Injury, or Damage
Continued use of the wheelchair that is not set
to the correct specifications may cause erratic
behavior of the wheelchair resulting in death,
serious injury, or damage.
– Performance adjustments should only be made
by professionals of the healthcare field or
persons fully conversant with this process and
the driver's capabilities.
– After the wheelchair has been set up/adjusted,
check to make sure that the wheelchair
performs to the specifications entered during
the set up procedure. If the wheelchair
does not perform to specifications, turn the
wheelchair Off immediately and reenter set up
specifications. Contact Invacare, if wheelchair
still does not perform to correct specifications.
WARNING!
Risk of Serious Injury or Damage
Moving the seating system from the factory
setting may reduce driver control, wheelchair
stability, traction and increase caster wear
resulting in serious injury or damage.
– Move the seating system ONLY when necessary
to fit the wheelchair to the user.
– If the seating system must be moved, ALWAYS
inspect the wheelchair to ensure the front
rigging DOES NOT interfere with the front
casters.
– If the seating system must be moved, ALWAYS
inspect to ensure the wheelchair DOES NOT
easily tip forward or backward.
WARNING!
– DO NOT connect any medical devices such as
ventilators, life support machines, etc. directly
to the batteries used to power the wheelchair.
This could cause unexpected failure of the
device and the wheelchair.
DANGER!
Risk of Death, Serious Injury, or Damage
Missing attaching hardware could cause instability
resulting in death, serious injury or damage.
– Ensure all attaching hardware is present and
tightened securely.
60101832-A
11
Summary of Contents for Ultra Low Maxx
Page 83: ...Notes ...
