12
WHEELER
13
WHEELER
Height - Adjustable backrest
1.
Lift up the backrest upholstery. Loosen the screws
(B) that are hidden in the attachments on the back-
rest. Raise or lower the backrest to the required
position. Loosen the Velcro strip (A) that is secured
around the backrest tubing. If the backrest is to be
lowered, this Velcro strip is no longer necessary
and can be tucked away together with the lowest
part of the upholstery. If the backrest is to be
raised, the Velcro strip is secured higher up when
the adjustment is complete. Tighten the screws.
Height - Comfort backrest
Backrest
The height of the backrest can be altered with stepless adjustment. If your
Wheeler has adjustable upholstery, the shape can also be adjusted.
Shape
3.
The user is to sit in the chair when the shape is
adjusted. Remove the backrest cover. Using the
Velcro strips, the shape can be adjusted to meet
the user’s needs for support and comfort. For
example, the strips in the small of the back can
be tightened to provide good support for the
small of the back and a more upright seating posi-
tion. When all adjustments have been made, the
backrest upholstery is folded back into place and
secured using the Velcro strips. Remember that the
balance of the chair is altered when the backrest
is adjusted.
1
2
3.
2.
The height of the backrest is adjusted by loosening
the two screws (A) that are hidden in the attach-
ments on the backrest. Move the backrest to the
required position and then tighten the screws.
BACKREST ANGLE
1.
Adjust the angle of the backrest by loosening the
screw (A) on the backrest attachment from the
inside of both sides of the chair. The angle of the
backrest can be altered by stepless adjustment
4 degrees forwards and 30 degrees backwards.
Tighten the screws.
1.
A
A
B
12 cm
Angle adjustments of the backrest increases
the risk of tipping over
!
A
