background image

1

WHEELER

Read the back cover of the instruction manual, which featu-
res a number of points affecting your personal safety. Read 
them carefully!
     Invacare  is  only  responsible  for  product  changes  car-
ried out by personnel whom we authorise. We reserve the 
right to make any changes to equipment and specifications 
without prior notice.

Wheeler is a wheelchair for children and teenagers, and 
has many adjustment options and accessories. To ensure 
that the user benefits as much as possible from Wheeler, 
and in order to Wheeler’s options justice, the chair must 
be tested and adjusted by competent personnel. The user 
and the assistant/parents must have received instructions 
for using Wheeler.

     This manual includes a description of the parts of the 
chair, simple adjustment options, how to use Wheeler safely 
and how to transport the chair. It also describes how the 
most common accessories are adjusted. The manual must 
be read through thoroughly before the chair is used. We 
also include an accessories manual, that describes how all 
accessories are fitted and slightly more advances settings.

     As Wheeler has many different components and ver-
sions of accessories, the appearance of the accessories you 
have for your Wheeler may differ from those shown.

Check that all components match the delivery note. Any 
transport  damage  must  be  reported  immediately  to  the 
transport company. Remember to keep the packaging until 
the transport company has checked the goods and a sett-
lement has been reached.

Wheeler

Delivery check

NB!!! 

!

Summary of Contents for Wheeler




































Reviews: