MPU-6000/MPU-6050 EV Board User Guide
Document Number: AN-MPU-6000EVB-00
Revision: 01
Release Date: 1/12/2011
InvenSense, Inc., 1197 Borregas Ave., Sunnyvale, Ca 94089, USA
12
AN-MPU6000-EVB-00
Tel: +1 (408) 988-7339 Fax: +1 (408) 988-8104
©2011 InvenSense, Inc. All rights reserved.
Website: http//www.invensense.com
8.2
Use of MPU-60X0 without ARM EVB board
I²C and SPI signals are available on JP13 and JP14. User can develop tools to communicate
with MPU-60X0. There is no bus mode selection setting needed.
9. Special Instructions
9.1
Electrostatic Discharge Sensitivity
The MPU-6050 gyro+accel can be permanently damaged by an electrostatic discharge. ESD
precautions for handling and storage are recommended.
9.2
Board Layout
The MPU-60X0 EV board is a 4 layer PCB with 38mm x 32mm dimension.
Figure 5. MPU-60X0 Board Layout: Top View & Bottom View
