inVENTer 1001-0200, Installation Instructions Manual

8

SYSTEM OVERVIEW: IV-LIGHT VENTILATION UNIT

8

iV-Light ventilation unit | Installation instructions

2 

System overview: iV-Light ventilation unit

The iV-Light ventilation unit is designed to ventilate living rooms and bedrooms in single- and 

multi-family houses, hotels and guest houses, rooms in public facilities and work rooms in office 

buildings. It is suitable for installation in new buildings as well as for retrofitting in old buildings. 

Installation is generally carried out in the exterior wall.

The ventilation unit consists of a wall sleeve in which the thermal accumulator insert is mounted. 

A lockable inner cover conceals the iV-Light discreetly from the interior. The filter integrated into 

the inner cover ensures that no pollen or dust from outside enters the interior. Outside, a weather 

protection hood conceals the components of the ventilation unit.

The thermal accumulator insert includes a ceramic thermal accumulator and inVENTron, two 

guiding vane elements and the Xenion reversible fan. The guiding vanes on both sides of the fan 

serve to straighten the air flow and ensure more efficient flow through the thermal accumulator. 

The unique geometry of the Xenion reversible fan effectively reduces sound transmission.

The standard length of the wall sleeve is 495 mm. For thicker walls, a wall sleeve with a length of 

745 mm can be ordered. Both versions can be shortened on site.

The ventilation unit is controlled via one of the following inVENTer system controllers

1)

:

•  sMove

•  inVENTer Connect

2)

•  MZ-Home

Components

• 

Inner cover incl. ISO Coarse 60 % filter

•  Thermal accumulator insert (thermal 

accumulator and inVENTron)

•  Wall sleeve

•  External termination

• 

Pollen and activated carbon filter 

(optional)

•  Sound and wind protection accessories 

(optional)

Models

The ventilation units of the iV-Light product range differ in their external terminations. Additional 

inner covers are also available. This documentation only contains information on the standard  

version of the ventilation unit. For information on the variants of the external and internal  

terminations, please refer to the separate installation instructions for the respective component.

•  Standard variant:

 iV-Light ventilation units with weather protection grille.

1) 

The operating instructions for the controller are not part of this documentation. 

2) 

In connection with the inVENTer Connect controller platform, it is mandatory to use the Connect inner cover.