background image

2

3

 

 

2

3

aV ALD ventilation device | Operating and cleaning instructions 

aV ALD ventilation device | Operating and cleaning instructions

Table of contents

1  User and safety instructions .................................................................................................. 4

1.1 

User information ............................................................................................................. 4

1.2 

Safety instructions .......................................................................................................... 5

2  System overview: aV ALD ventilation device ....................................................................... 6

2.1 

Construction ................................................................................................................... 8

2.2 

Function ......................................................................................................................... 9

3  Operation .................................................................................................................................. 10

3.1 

Setting the flow rate

 ....................................................................................................... 10

4  Cleaning and care .................................................................................................................... 11

4.1 

Cleaning / replacing the dust filter

 .................................................................................. 14

4.2 

Clean the sound insulation lining and Inventin

® ...........................................................................................................17

4.3 

Attaching the inner cover panel...................................................................................... 19

5  Accessories and spare parts .................................................................................................. 20

6  Troubleshooting and disposal ............................................................................................... 21

6.1 

Troubleshooting ............................................................................................................. 21

6.2 

Disposal ......................................................................................................................... 22

7  Guarantee and warranty ......................................................................................................... 23

8  Service ...................................................................................................................................... 23

9  Annex 1: Cleaning log ............................................................................................................. 24

Trademarks, copyrights and property rights

inVENTer

®

 is a registered trademark of inVENTer GmbH.

The copyright to this document remains with the manufacturer.

Rights to all content and images: © inVENTer GmbH 2022.

All trademarks used in this document are the property of their respective manufacturers and are 

hereby acknowledged.

Disclaimer

This documentation represents the original operating and cleaning instructions. After completion 

of the installation it must be given to the user (tenant, owner, property management, etc.).

The content of this documentation has been checked for compliance with the described com

-

ponents. Nevertheless deviations may still occur, therefore no guarantee of compliance can be 

provided.

This documentation describes the functionality of the standard scope.  

For reasons of clarity, the documentation does not purport to cover all details on all types of the 

product and cannot cover every conceivable scenario for operation, cleaning and repair.

The illustrations in this document may differ slightly from the design of the product that you have 

purchased. The same functionality is ensured despite any design deviations.

This documentation is updated regularly. Necessary corrections and appropriate supplements 

are always included in subsequent editions. You can find the latest version at 

www.inventer.de/

downloads.

Company information 

Publisher:

inVENTer GmbH  

 

Phone:   +49 (0) 36427 211-0

Ortsstraße 4a  

 

Fax:  

+49 (0) 36427 211-113

07751 Löberschütz    

E-mail:   info@inventer.de

Germany    

 

Web:  

www.inventer.de

CEO: Annett Wettig

VAT ID number: DE 815494982

Jena District Court HRB 510380

Summary of Contents for aV100 ALD















Reviews: