background image

4

5

USER AND SAFETY INSTRUCTIONS

USER AND SAFETY INSTRUCTIONS

4

5

aV ALD ventilation device | Operating and cleaning instructions 

aV ALD ventilation device | Operating and cleaning instructions

User and safety instructions

Thank you for purchasing this high-quality product from inVENTer!

This section provides an overview of the basic safety precautions for safe and proper operation 

of your ventilation system.

1.1  User information

Safety and warning instructions

The safety and warning instructions in these operating and cleaning instructions have a uniform 

structure and are marked with a symbol on the left side of the instruction. 

 

A signal word in front of the text also indicates the hazard level. If several hazard levels exist, the 

highest level safety instruction is always used.

The safety and warning instructions contain the following information:

SIGNAL WORD

Type and origin of the danger.

 Possible consequences of the danger!

Measures to avoid the danger.

The signal word indicates the severity of the potential danger unless the preventive measures are 

taken:

WARNING 

means: Possible danger of serious injury or death.

CAUTION 

means: Direct danger of minor/significant injury.

NOTICE M

eans: Direct or possible risk of property damage due to an adverse event/state.

If you see these signs, ensure you observe the described measures to prevent possible hazards 

and/or damage.

Other symbols used in this documentation

In addition to the safety instructions, the following symbols are used:

 

This symbol indicates practical and useful tips for handling your ventilation system.

 

Before each step, any additional tools and materials required for the activity are listed.

 

Red bar 

over a graphic: graphic shows the interior wall.

 

Blue bar 

over a graphic: graphic shows the exterior wall.

►           

Action required:

 Prompts the user to perform a specific action.

           

Check the results:

 Prompst the user to check the results of the action performed.

      

Action focus:

 To be taken into account in the corresponding step.

1.2  Safety instructions

These operating and cleaning instructions are part of your ventilation system and must be perma-

nently available. When handing the equipment / system to a third party, the operating and clean

-

ing instructions have must be handed over also. Before performing any work on the equipment / 

system, read the operating and cleaning instructions carefully and observe all information in this 

section regarding operation, cleaning and care. Also note the safety instructions that precede the 

described handling instructions. Non-observance of safety instructions could result in injury and/

or property damage.

Intended use

The aV ALD exterior wall air outlet is used to allow exterior air to flow in according to 

 

DIN 18017-3 and DIN 1946-6 in residential devices and supplements the extract air device.

Any kind of use other than the intended use will exclude all liability claims.

General information

• 

Only use the components in accordance with the usage scenarios described in this documen

-

tation.  

Changes or modifications to the components are not permitted.

• 

Your ventilation device has been developed exclusively for use in ambient temperatures 

between -20 and +50°C and the components of this installation variant must also only be used 

within this temperature range.

•  Trouble-free and safe operation of the components of this installation variant depends on prop-

er transportation, proper storage and installation, as well as careful cleaning and care.

Operation, cleaning and care

• 

CAUTION:

 

Operation and/or care of the device must not be carried out by children and/

or persons who are not fully capable of doing so due to their physical, sensory or mental 

capabilities, inexperience or lack of knowledge. 

Young children should be supervised to ensure that they do not play with the equipment.

• 

NOTICE: 

Your device has scratch-sensitive plastic surfaces. Do not touch the inner cover with 

oily and/or dirty hands. Avoid contact with sharp or pointed objects, e.g. rings.

• 

NOTICE: 

Do not use strong cleaning agents or solvents. Use a soft, damp cloth to clean the 

plastic surfaces.

• 

NOTICE: 

Never use the device without the filters and inner cover

 

• 

NOTICE: 

Remove/avoid obstacles that hinder access to, or removal of, components of the 

ventilation device.

If your device has a fault, contact your nearest distributor or our technical service.

Any kind of use other than the intended use will exclude all liability claims.

Improper use

Any use that is not mentioned in the intended use section, is considered to be improper.

i

!

Summary of Contents for aV100 ALD















Reviews: