16
17
OPERATION
OPERATION
16
17
aV ALD ventilation device | Operating and cleaning instructions
aV ALD ventilation device | Operating and cleaning instructions
Flair Zero ALD inner cover
►
Open the inner cover
► Press the side detent lugs inwards on the inner
cover's spacers.
► Pull the inner cover panel forwards.
Disengage all spacers.
►
Remove the inner cover panel from the front.
► Then pull the filter cartridge out of the wall sleeve.
Once the filter has been removed, access to the
sound insulation lining and Inventin® is clear.
Before reinserting the filter cartridge, wipe out
the sound insulation lining and Inventin® as
well as the wall sleeve with a damp cloth.
► Clean the dust filter under warm running water.
► Wait until the dust filter is completely dry
or
dispose
of the dust filter if it is defective.
► Slide the filter cartridge into the wall sleeve flush
with the interior wall
You have cleaned / changed the dust filter
4.2 Clean the sound insulation lining and Inventin
®
Inventin
®
is a high-performing, patented material for use in decentralised ventilation devices. It
absorbs sound waves from outside and from the device itself (sound transmission and inherent
sound).
The sound insulation lining is part of the aV160 ALD. On the aV200 ALD, Inventin
®
is also in-
stalled in addition to the sound insulation lining.
Below you will find general instructions for all ALD devices. A more detailed description of the
individual parts can be found in the installation instructions for your device. The latest version can
be found at www.inventer.de/downloads.
Clean the sound insulation lining
Requirement
• The inner cover panel has been removed.
•
The filter cartridge has been removed.
► Remove the sound insulation lining from the wall
sleeve.
► Clean the sound insulation lining with a damp cloth.
Once the sound insulation lining has been
removed, access to the wall sleeve is clear.
Wipe the wall sleeve down with a damp cloth.
► Reinsert the sound insulation lining into the wall
sleeve
You have cleaned the sound insulation lining.
!
i
NOTICE:
Using harsh cleaning agents or
rough cloths can
scratch the surface of the
mats!
• Clean the sound insulation lining carefully.
i
i
i
i
