4
USER AND SAFETY INSTRUCTIONS
inVENTer Connect controller platform | Operating instructions
1
User and safety instructions
1.1 User information
Safety and warning instructions
The safety instructions in these operating instructions have a uniform structure and are marked
with a symbol on the left side of the instruction. A signal word above the text also indicates the
hazard level. If several hazard levels exist, the highest level safety instruction is always used.
The safety and warning instructions contain the following information:
SIGNAL WORD:
Type and origin of the hazard.
Possible consequences of the hazard!
Measures to avoid the hazard.
The signal word indicates the severity of the potential hazard unless the preventive measures are
taken:
DANGER
means:
Immediate danger of serious injury or death.
CAUTION
means:
Potential risk of mild / moderate physical injury or death.
NOTICE
means:
Direct or possible risk of property damage due to an adverse
event/state.
If you see these signs, ensure you observe the described measures to prevent possible hazards
and/or damage.
Other symbols and notices used in this documentation
In addition to the safety instructions, the following symbols are used:
A
TIP
symbol indicates practical and useful tips for handling the devices on the
inVENTer Connect controller platform.
Before each step, any additional tools and materials required for the task are listed.
Red bar
over a graphic: graphic shows the interior wall.
Blue bar
over a graphic: graphic shows the exterior wall.
►
Action required:
This prompts the user to perform a specific action.
Check the results
requires you to check the results of the action you have performed.
Book:
refers to another section in this documentation.
Action focus:
To be taken into account in the corresponding step.
Scroll:
Operating option within the "inVENTer Mobile" app.
By swiping across the screen (horizontally: or vertically: ), you can scroll through
various selection and setting screens, e.g. ventilation
profiles.
