8
SYSTEM OVERVIEW: IV-SMART+ VENTILATION DEVICE
8
iV-Smart+ ventilation device | Installation instructions
2
System overview: iV-Smart+ ventilation device
The iV-Smart+ ventilation system is designed to ventilate living rooms and bedrooms in single-
and multi-family houses, hotels and guest houses, rooms in public facilities and work rooms in
office buildings. It is suitable for installation in new buildings as well as for retrofitting in old
buildings. Installation is generally carried out in the exterior wall.
The ventilation device consists of a wall sleeve in which the thermal accumulator insert is
mounted. A lockable inner cover conceals the iV-Smart+ discreetly from the interior. The filter inte
-
grated into the inner cover ensures that no pollen or dust from outside enters the interior. Outside,
a driving rain-proof cover conceals the components of the ventilation device.
The thermal accumulator insert includes a ceramic thermal accumulator and inVENTron, two
guiding vane elements and the Xenion reversible fan. The guiding vanes on both sides of the fan
serve to straighten the air flow and ensure more efficient flow through the thermal accumulator.
The unique geometry of the Xenion reversible fan effectively reduces sound transmission.
The standard length of the wall sleeve is 495 mm. For thicker walls, a wall sleeve with a length of
745 mm can be ordered. Both versions can be shortened on site.
The ventilation device is controlled via one of the following inVENTer system controllers
1)
:
• Pure
• sMove
• inVENTer Connect
2)
• MZ-Home
Components
•
Inner cover incl. ISO Coarse 60 % filter
• Thermal accumulator insert
(thermal accumulator and inVENTron)
• Wall sleeve
• External termination
3)
•
Pollen and activated carbon filter
(optional)
• Sound and wind protection accessories
(optional)
Models
The ventilation devices of the iV-Smart+ product range differ in their external terminations. Addi
-
tional inner covers are also available. This documentation only contains information on the stand-
ard version of the ventilation device. For information on the variants of the external and internal
terminations, please refer to the separate installation instructions for the respective component.
1)
The operating instructions for the controller are not part of this documentation.
2)
In connection with the inVENTer Connect controller platform, it is mandatory to use the Connect inner cover.
3)
"Flex weather protection hood" external termination available in stainless steel or optionally in aluminium
[increased salt resistance]. "Smart weather protection hood" external termination available in stainless steel.
