24
OPERATION
24
MZ-Home | Operating instructions
Programming the 7-day timer
7-day timer settings can only be made if the 7-day timer option is activated
(
On
) for the desired
zone.
The programming of the 7-day timer is carried out separately for each specified time interval and
each day of the week. Afterwards, the settings entered for one day of the week can be applied to
the corresponding zone for all days of the week.
Use the navigation arrows
/
to navigate between the day of the week, operating mode, out-
put level and time of day. No value should flash for this purpose.
Programming procedure:
Step 1: Set weekday
Step 2: Set time interval
Step 3: Set ventilation mode
Step 4: Set fan speed
Step 5: Transfer the data of the set weekday (all time intervals) for all weekdays in the corre-
sponding zone
Step 1: Select weekday
►
Touch the navigation arrow
.
The marker arrow (
>
) is set to the next menu
item that can be set.
Requirements:
• The 7-day timer for the selected zone is active.
►
Use the navigation arrow
to select the
day
menu item.
►
Touch the navigation arrow
to confirm the
selection.
The
day indicator
flashes.
►
Select the day of the week with the navigation
arrow
/
to select the day of the week.
►
Touch the navigation arrow
to confirm the
selection.
The flashing stops.
You have selected the day of the week.
i
7 - d a y t i m e r
>
M o
>
0 2 - 0 4 h
>
V E N T
>
L E :
7 - d a y t i m e r
>
M o
0 2 - 0 4 h
V E N T
L V :
7 - d a y t i m e r
>
S o
0 2 - 0 4 h
V E N T
L V :
