SAFETY AND OPERATING MANUAL
25
202055 3.6V Lithium screwdriver
OPERATION
1) OPERATION INSTRUCTIONS
Inspect the screwdriver before using to ensure all parts
are running smoothly and there no abnormal sounds or
sparks. Before driving fasteners, check behind walls for
wire, other electrical hazards or plumbing. Clear the work
area of all parts and debris that may cause injury by flying
objects. Securely fix the object to be fastened in a vice
or otherwise clamp to avoid injury. Do not attempt to hold
work piece by hand.
2) FITTING AND REMOVING BITS (SEE FIG.B)
To use any one of the short bits, insert the bit into the
bit holder and push the holder into the chuck as far as
possible. To remove the bit, simply pull it out of the bit
holder.
NOTE:
Always use a bit holder when fitting the short bits!
3) FORWARD/REVERSE SWITCH (See Fig.C)
The screwdriver has forward/reverse function, press
the Forward/Reverse Rotation Switch (4) in the left part,
it is reverse function, then press the Forward/Reverse
Rotation Switch in the right part, it is forward function.
WARNING: Never change the direction of rotation
when the chuck is rotating. Wait until it has
stopped.
4) ADJUSTABLE HANDLE (See Fig.D, E)
This machine can use as straight grip or pistol grip.
Push Adjust Handle Lock Switch (3) onward and hold it,
adjust the Handle to desired position. Release the switch
and Adjust Handle Lock Switch will recover itself, and then
you can use the machine.
5) SWITCH LOCK
The On/Off switch trigger can be locked in OFF position.
This helps to reduce the possibility of accidental starting
when not in use. To lock the switch, place the forward and
reverse rotation selector in the center position by pushing
it on either side of the body.
6) USING THE SIGHT LIGHT
The sight light allows you to keep a clear view under less
illuminated circumstances. To turn on the light simply
press the on/off switch. When you release the on/off
switch, the light will be off.
7) ON/OFF SWITCH OF THE TORCH (SEE FIG.F)
There is a torch in the end of the machine. The torch
produces a light beam that emerges from the lamp head (1).
1
2
Summary of Contents for 202055
Page 1: ...TOURNEVIS SANS FIL 3 6V Notice à lire attentivement et à conserver REF 202055 T2A ...
Page 15: ...3 6V LITHIUM SCREWDRIVER Safety and operating manual REF 202055 T2A ...
Page 27: ...SAFETY AND OPERATING MANUAL 27 202055 3 6V Lithium screwdriver ...
Page 28: ...АКУМУЛАТОРНА ОТВЕРТКА 3 6 V Да се прочете внимателно и да се запази 202055 T2A ...
