SAFETY AND OPERATING MANUAL
15
202106 280W DELTA SANDER
You must read operating instructions before using the tool. Keep operating instructions
with the tool. Keep operating instructions with the hammer, so that they may be referred to,
if necessary.
Type PDS280G (PDS - designation of machinery, representative of Delta Sander)
Voltage input
230-240V~50Hz
Power input
280W
No-load speed
6000-11000/min
Base size
90x90x90mm
Protection class
/II
Machine weight
2.2 kg
NOISE DATA
A weighted sound pressure L
pA
= 84.5 dB(A)
K
pA
= 3 dB(A)
A weighted sound power
L
wA
= 95.5 dB(A)
K
wA
= 3 dB(A)
Wear ear protection.
VIBRATION INFORMATION
Vibration total values (triax vector sum) determined according to EN 62841:
Vibration emission value a
h
= 7.566 m/s²
Uncertainty K = 1.5 m/s²
The declared vibration total value and the declared noise emission value have been measured in
accordance with a standard test method and may be used for comparing one tool with another.
The declared vibration total value and the declared noise emission value may also be used in a
preliminary assessment of exposure.
WARNING:
The vibration and noise emissions during actual use of the power tool can differ
from the declared value depending on the ways in which the tool is used especially what kind of
workpiece is processed dependant on the following examples and other variations on how the
tool is used:
How the tool is used and the materials being cut or drilled.
The tool being in good condition and well maintained.
The use of the correct accessory for the tool and ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any anti vibration and noise accessories are
used.
And the tool is being used as intended by its design and these instructions.
This tool may cause hand-arm vibration syndrome if its use is not adequately managed.
WARNING:
To be accurate, an estimation of exposure level in the actual conditions of use
1. TECHNICAL DATA
