6
NOTE:
Before performing any type of installation, disconnect the
Freezer from the electrical source. When you are finished, connect
the Freezer to the electrical source and reset the control to the
desired setting.
LEVELING
If the Freezer is not leveled during installation. The doors may not
close or seal properly, causing cooling, frost, or moisture problems. It
is very important of the Freezer to be level in order to function
properly.
To level your Freezer you may either turn the level leg clockwise to
raise that side to the Freezer or turn counter
– clockwise to lower that
side.
NOTE:
Having someone push against the top of the Freezer take
some weight off the leveling leg. This makes it easier to adjust the
leveling leg.
USE OF THE APPLIANCE
To obtain the best possible results form your Freezer, it is important
that you operate it properly.
Temperature Control
The temperature in the freezer is controlled by the thermostat control
knob.It is loaded in the top-front of the freezer. Turn the thermostat
control knob up or down to regulate the temperature inside the
freezer. The markings on control knob indicated the “1~4” for the
different temperature grades. The temperature decreases with
position
“1” being the warmest and position “4” being the coldest.
Set the control to position bet
ween “1” and “4” for normal use, the
exact position is beyond the temperature in the freezer,
generally ,
