THE FITTING OF THE APPLIANCE
• Check that the cabinet and the space for the oven meet the dimension and ventilation requirements.
• Slide the oven into the cabinet. Make sure the housing of the oven does not come in contact with the walls of the kitchen cabinet.
Make sure there is at least 2 mm between the oven casing and the walls of the kitchen cabinet. Make sure the oven is centered
between the walls of the kitchen cabinet.
Note:
Make sure the cable is not stuck and does not lie on top of the oven.
• Open the oven door and insert the bushings, provided, in the holes on the front.
• Use the provided screws to fasten the bushings to the cabinet. Take care not to over tighten and break the bushing.
• Close the oven door and plug the appliance in.
• The oven is now ready for use.
ELECTRICAL CONNECTION
Check that the voltage in your home corresponds with the voltage printed on the appliance.
These groups in the meter must be secured with at least 16 amps each. The connection cable must have a cross-section of at least
2.5mm² and must have a length of at least 1.5 m. When the cable is too short, you have no room to already connect the oven and place
it against the wall before plugging it in.
INSTALLATION DIMENSIONS
In the drawing below, all the dimensions are displayed in mm. Make sure you use the right drawing for the model you have.
26
•
English
IOV6011-instructions.indd 26
15-12-2014 12:14:28