inventum KV1615S, Instruction Manual

cleaning & maintenance

6

Before cleaning the appliance, switch the appliance off by setting the thermostat to 0 and remove the plug from the socket.

The cooler section of the refrigerator defrosts automatically. Defrost the appliance when the layer of ice in the freezer 
section has reached a thickness of 3 to 5 mm. Use this opportunity to clean the appliance. 
When there is white frost on the rear wall of the cooler section, it will defrost automatically. The defrost water runs 
downwards and is discharged via the defrost water drain. The opening of the defrost water drain can become clogged. Clean 
the opening by means of the skewer. 

For areas that are difficult to clean in the refrigerator, such as narrow gaps or corners, it is recommended to wipe them 
regularly with a soft rag, soft brush, etc. When necessary use some auxiliary tools, such as thin sticks (tooth picks), to ensure 
no contamination can accumulate in these areas.

Clean the outside of the refrigerator and the door gasket with mild soap and water. Use a soft moist cloth.

We recommend that you dust the back of the appliance and on the floor with a cloth or vacuum cleaner once a year in order 
to maintain a good output and low energy consumption.

Do not use hard brushes, cleaning steel wire balls, wire brushes, abrasives, such as toothpastes, organic solvents (such as 
alcohol, acetone, oils, etc.), boiling water, acid or alkaline items to clean the refrigerator considering that this may damage 
the fridge surface and interior. Boiling water and benzene may deform or damage plastic parts.

DEFROSTING AND CLEANING THE REFRIGERATOR

•  Switch off the thermostat 

[0]

 and remove the plug from the socket. 

•  Open the door and remove the products. Store the products on a cool location, packed in newspapers and blankets. 
•  Leave the door open, this will accelerate the defrosting process. 
•  Place a receptacle under the freezer section and wait for the ice to defrost. You can also place a dish with hot water (not 

boiling) in the freezer section. 

  Remove loose ice using a plastic scraper. 

Warning 

Never remove ice with sharp objects, defrosting sprays, a hair dryer, a 

heater or something similar. This could lead to unsafe situations and cause irreparable damage to the appliance.

•  Clean the interior of the appliance. Use warm soapy water with, for instance, washing-up liquid, all-purpose cleaner or 

soda in order to prevent nasty smells. Wipe the inside of the appliance after cleaning with clean water and properly wipe 
everything dry. 

•  Leave the appliance to dry for 1 to 2 hours. The shelves and drawers can be removed from the appliance easily and 

washed by hand. These components may never be cleaned in the dishwasher.

•  Clean the outside of the appliance and the door rubbers with a soft damp cloth.
•  Switch on the appliance in accordance with the user instruction.

INSTRUCTIONS

•  A large amount of ice on the freezer surfaces disrupts the operation of the appliance and increases the energy 

consumption.

•  Defrost the appliance at least once or twice per year. When too much ice is formed, you must defrost the appliance more 

often.

•  Place the frozen products in a large tray, wrapped in newspapers and a blanket and store them on a cool location.
•  Defrosting the refrigerator should be done as quickly as possible. Storing the products at room temperature for a time 

period that is too long reduces their shelf life.

REPLACING THE LED LAMP

This appliance has been provided with a LED lamp. This lamp lasts for a longer period of time. When the LED lamp in the 
appliance is broken, you are not able to replace it yourself. Contact the Inventum service department.

26

•

 English