2 | INTERESTING FACTS
The measuring principle of the diagnostic scale
This scale determines the body weight, bodyfat, body
water and the percentage of muscle according to the
principle of Bioelectric Impedance analysis (BIa). with
this process, an imperceptible, completely safe and
harmless current enables the determination of body
tissue proportions within seconds. This measurement
of electrical resistance (impedance) and the inclusion of
constants and/or individual values (age, height, gender)
can be used to determine the percentage of fat, water and
muscle in the body. Muscle tissue and water have good
electrical conductivity, as the fat cells hardly conduct the
current due to their very high resistance.
Weighing correctly
If possible, always weighs yourself at the same time of
day (ideally in the morning), after going to the toilet,
on an empty stomach and without clothes to achieve
comparable results. Minor deviations are normal. when
you drink 1 glass of water for example a difference of 300
grams can occur. place the scale on a firm, flat surface;
a firm floor covering is a basic requirement for correct
weight measurement.
Your scale is an accurate instrument. The human body is
the hardest thing to weigh, because it is always in motion.
Therefore a 99% accuracy of the body weight is the
highest possible. stand on the scale without moving and
with equal weight distribution on both feet!
Do not underestimate the weight of clothing and when
you have just eaten or drunken anything. only the long-
term trend counts.
5 | WEIGH oNLy
10
3 | BEFoRE FIRST USE
Before you use the appliance for the first time, please do
as follows: carefully unpack the appliance and remove
all the packaging material. Keep the material (plastic
bags and cardboard) out of reach of children. check the
appliance after unpacking for any damage, possible from
transportation. place the scale on a firm, flat surface.
remove the batteries from the protective packaging and
insert with the correct polarity. see the diagram inside the
battery compartment.
press the
UNIT
button on the back of the scale to select
the correct measuring unit (kg/st/lb).
kg = kilograms
lb = pounds
st = stone
place the scale on a flat and stable surface and wait for the
scale to turn itself off.
4 | PERSoNAL DATA
You must enter personal user parameters in order to
measure your body fat percentage and other physical data.
The scale has 8 memory positions in which you and other
members of your family can save and retrieve personal
settings.
now you can enter the following setting:
Memory position (p)
1 to 8
Body size
100 to 220 cm
age
10 to 80 years
gender
male ( ), female ( )
sportsman or -woman
,
• press the
SET
key when the display is
switched off to change the setting. The
first memory position
P1
flashes on the
display. To select the correct user, press
the
or
keys and press the
SET
key
again to confirm.
• after you have entered the correct user, the symbol for
gender will blink. To select the gender (male, female,
sportsman, sportswoman), press the
or
keys and
press the
SET
key again to confirm.
• after you have entered the gender, the indication for
body size (height) will blink (preset 170 cm). To set your
own height press the
or
keys and press the
SET
key again to confirm.
• after you have entered your body size, the indication
for age will blink (preset 40). To set the correct age
(male, female, sportsman, sportswoman), press the
or
keys and press the
SET
key again to confirm.
after all parameters have been entered, you can now
measure your weight, body fat and the other data. The
display will show
0,0 kg
.
stand on the scale barefoot and let the scale perform a
measuring. when you step on the scale the next time the
scale will recognize you. when you step off the scale, the
scale will switch off after a few seconds.
TIP:
To reset a memory position for another user perform
the same steps as described above. all positions are preset.
The scale has a step-on function. step barefoot onto the
scale. stand still with your weight
distributed evenly on both legs. The scale
will start measuring your weight
immediately and a short time later will
display your weight. when you step off the
scale it will turn off after a few seconds.
6 | BoDy ANALySIS
when you stay on the scale after it displayed your weight,
the scale will automatically perform a body analysis. The
scale can identify users according to the weight.
Important:
When using the analysis function, make
sure there is no contact between your feet, legs,
calves or thighs. Otherwise the measurement will not
be performed correctly.
after the weight is stable, the “0” signal moves from left to
right for two times, and then shows the data.
