2 | INTERESTING FACTS
Weighing correctly
If possible, always weighs yourself at the same time of
day (ideally in the morning), after going to the toilet,
on an empty stomach and without clothes to achieve
comparable results. Minor deviations are normal. when
you drink 1 glass of water for example a difference of 300
grams can occur. place the scale on a firm, flat surface;
a firm floor covering is a basic requirement for correct
weight measurement.
Your scale is an accurate instrument. The human body is
the hardest thing to weigh, because it is always in motion.
Therefore a 99% accuracy of the body weight is the
highest possible. stand on the scale without moving and
with equal weight distribution on both feet!
Do not underestimate the weight of clothing and when
you have just eaten or drunken anything. only the long-
term trend counts.
The measuring principle of the BMI scale
Body Mass Index (BMI) states the relation between weight
and lenght according to the calculation body weight
in kilogram divided by the square of the body lenght in
meter.
BMI = body weight (kg) / body length (m)
2
For instance: a person weighs 75 kilograms and has a
lenght of 1,80 m. The BMI will be: 75 / (1,8x1,8) = 23
The limits for BMI defined by who - world helath
organization.
Classification
Index (kg/m
2
) -
BMI
underweight
less than 17,5
mild thinness
less than 18,5
normal weight
18,50 - 24,99
overweight
25,00 - 29,99
obese
more than 30
5 | WEIGH oNLY
8
3 | BEFoRE FIRST USE
Before you use the appliance for the first time, please do
as follows: carefully unpack the appliance and remove
all the packaging material. Keep the material (plastic
bags and cardboard) out of reach of children. check the
appliance after unpacking for any damage, possible from
transportation. place the scale on a firm, flat surface.
remove the batteries from the protective packaging and
insert with the correct polarity. see the diagram inside the
battery compartment.
press the
UNIT
button on the back of the scale to select
the correct measuring unit (kg/st/lb).
kg = kilograms
lb = pounds
st = stone
place the scale on a flat and stable surface and wait for the
scale to turn itself off.
You must enter personal user parameters in order to
measure your body fat percentage and other physical data.
The scale has 4 memory positions in which you and other
members of your family can save and retrieve personal
settings.
now you can enter the following setting:
Memory position (p)
1 to 4
Body size
100 to 220 cm
• press the
SET
key when the display is switched off to
change the setting. The first memory position
P1
flashes
on the display. To select the correct user, press
the
or
keys and press the
SET
key again to confirm.
• after you have entered the correct user, the indication for
body size (height) will blink (preset 165 cm). To set your
own height press the
or
keys and press the
SET
key again to confirm.
To switch between cm and ft press
the
UNIT
button on the back of the scale.
after all parameters have been entered, you can now
measure your weight and BMI. The display will
show
0,0 kg
.
TIP:
To reset a memory position for another user perform
the same steps as described above. all positions are preset.
The scale has a step-on function. step barefoot onto the
scale. stand still with your weight
distributed evenly on both legs. The scale
will start measuring your weight
immediately and a short time later will
display your weight. when you step off the
scale it will turn off after a few seconds.
4 | CALCULATING BmI
remember that only long-term trends are important.
short-term fluctuations in weight over a few days are
usually the result of a loss of fluid.
• If possible, always weighs yourself at the same time
of day (ideally in the morning), after going to the toilet,
on an empty stomach and without clothes to achieve
comparable results.
• stand still during the measurement.
• wait several hours after unusually strenuous activity.
• wait approx. 15 minutes after getting out of bed so that
the water in your body can be distributed.
6 | TIPS
