21
Transporting Lithium-ion Batteries
Transporting Batteries to a Different Location
If the battery needs to be shipped to a different location or sent back to Inventus Power for any
reason:
1. Disconnect all cables, both power and communications from the batteries.
(reference section “Disconnecting the Battery” for proper disconnection procedure)
2. Place the protective caps on the battery terminals prior to removing the battery from its
current location, to prevent accidental shorts or arcing from occurring if a terminal touches
a metal object.
3. All large lithium-ion batteries are considered “Dangerous Goods” by the US Department of
Transportation, and as a result, transporting them by common carrier (whether by ground
or by air) requires compliance with UN DOT regulations UN3480, Class 9
- “Dangerous Goods”.
4. Pack the batteries in “Dangerous Goods” certified boxes and packaging materials as
specified by the Department of Transportation (DOT). The packaging must protect the
contents from reasonable handling damage and prevent short circuits from taking place.
Ideally, one would use the original box if it’s still in good condition.
5. The package should be prepared for shipment and shipping documents should be signed
by an individual who is certified to handle and prepare the paperwork and products that
have been designated as “Dangerous Goods” for shipment.
IMPORTANT: Each PROTRXion
TM
battery is shipped in a specially designed box
to provide maximum protection for the contents. We strongly recommend that
you save this box and use it whenever you need to transport or ship the battery.
Please follow all local laws/regulations regarding the shipment of lithium-Ion
batteries.
Following UN and DOT Regulations
Failure to comply with UN and DOT regulations while transporting Class 9 Hazardous Materials
(Dangerous Goods) may result in substantial civil and criminal penalties.