6 Configuration of the device
If using the controller for the first time it is needed to configure the controller as shown
below
6.1
Changing the PC settings for controller configuration.
After connecting the controller to the network there is a need to change the PC setting.
In order to do that navigate to: Start->Control Panel->Network connections.
Then right click on the current network connection and click „Properties”.
Choose the „Internet Protocol (TCP/IP)”, press „Properties”. Tick the box „Use the
following IP address” and type as following:
IP address: 192.168.111.1
Subnet Mask: 255.255.255.0
The rest of the setting can be left blank.
Press OK to accept the changes
Start the web browser and enter the following address into address bar:
192.168.111.15
.
(Default user and password: admin/admin00
)
Then select the menu "NETWORK"
User manual RFID IND-U4, RFID IND-U2
Page
8
from
31
Configure of the network connection
