2
| Optipad TFT Remote Keypad IP55 User Guide |
Version 1.02
www.invertekdrives.com
General Specification
Compatible Drives:
ODE-2, ODE-3, ODP-2, ODL-2, ODV-3, CV
Signal Interface:
Standard 8-way RJ45 connector
Supply Input:
24V + / - 10%, DC, 30mA
RS485 Signal:
Industry standard 2-wire +5V differential
Environmental:
Operational: -10 … 50°C
Storage:
-40°C … 60°C
Relative Humidity:
< 95% (non condensing)
Protection Rating:
IP55
Max Cable Length:
25m / 82.5ft shielded twisted pair
Mechanical Installation
Dimensions
110mm
100mm
90mm
80mm
Through Panel Mount
The panel on to which the Optipad is to be mounted should be
cut out in accordance with the diagram below.
110mm
102mm
81mm
Electrical Installation
Cable Requirements
1
1
CAUTION!
Incorrect cable connection may damage the drive. Extra care should be taken when using third party cable.
