19
Remove both retaining screws from the
lower Adjustment Panel.
Before Removing the nuts and screws (
a
)
from each side of the lower Backrest
Frame Fig.15, note which mounting holes
were being used in the Connecting Plates,
to ensure the Backrest is refitted to the
same angle as before.
With the Frame disconnected, lift clear and
slide lower Adjustment Panel off the
Frame.
Re-install
Backrest
Frame
to
the
Connecting Plates using the original
screws and nuts. Tighten sufficiently to
prevent any movement.
NOTE: Alternative Backrests should be installed onto the Invicta Backrest Frame
in accordance with the instructions supplied with that device.
Fig.15
Retaining Screws
Nuts and
Screws (
a
)
Summary of Contents for IPC-S
