20
Both Invicta “S” and “T” models are equipped with depth adjustable, swing
-away,
Footrest Hangers, with flip-up, height and angle adjustable Footrests. Fig.16.
Footrest Hanger depth
adjustment:
Tools Required:- 13mm Spanner,
4 and 6mm Hexagon Keys.
Before commencing this procedure,
the wheelchair should be vacated
and parked on a firm level surface,
with both Parking Brakes applied
and Drive Selector Lever set to the
“Drive” position, Fig.9.
For ease of working, remove
both Hangers and Footrests from the wheelchair, leaving just the Hanger Mounts
attached to the Seat Frame, Fig.17a
Remove screws and nuts (
a
) and slacken grub-screws (
b
).
Slide Hanger Mount in or out of the Seat Frame to the nearest required position
to allow alignment of mounting holes.
Re-install screws and nuts (
a
) to finger tight. Fully tighten grub-screws (
b
), then
fully tighten screws and nuts (
a
) sufficient to prevent any movement.
Re-install Hangers and Footrests.
[Cont]
FOOTREST HANGERS and FOOTPLATES
Fig. 16
Alternative depth
adjustment positions
For Hanger Mounts.
(
a
)
(
b
)
Angle
Adjustment
Lock-screw
Height
Adjustment
Lock-screw
Swing-away
Release catch
Fig. 17a
Screws and nuts (
a
)
Grub-screws (
b
)
Outrigged Hanger Mounts
Summary of Contents for IPC-S
