Setting the Clock
To set the clock press and hold the TIME button on the front of the unit for a few
seconds.
12H/24H will Blink. Press SEL+/SEL- to select the mode required and press TIME
once to confirm.
Press SEL+/SEL- to select the hour and press TIME to confirm
Press SEL+/SEL- to select the minutes and press TIME to confirm
The clock has now been set.
Note that during this process, if no button is pressed within 5 seconds the clock will
revert to the previous setting. Also note that the clock cannot be set using the
remote control.
Setting the Alarm
Setting the alarm is very similar to setting the clock. Press and hold the ALARM
button on the front of the unit for a few seconds.
Press the SEL+/SEL-
to ensure that the word “Alarm” appears on the display. If you
want to switch the alarm off ensure that the “Alarm” is not displayed. Press ALARM
to confirm
Press SEL+/SEL- to select the hour and press ALARM to confirm
Press SEL+/SEL- to select the minutes and press ALARM to confirm
The alarm has now been set.
Note that during this process, if no button is pressed within 5 seconds the alarm will
revert to the previous setting. Also note that the clock cannot be set using the
remote control.
There are two alarms that can be set. Before initiating this process press the alarm
button to switch between alarm1 and alarm 2.