All-In-One Professional Music-On-Hold
MP3 USB/SD Digital Player/Adapter
Models: SX8800-4LPE, SX8800-2LPE
Rev 29
•
Insert the SD card into the SD card slot and make sure it snaps IN fully
•
Plug the included AC adapter. (110/240 V AC to 12V DC)
•
Confirm that all 4 Red LED lights in front of this unit are double blinking
•
Confirm that STATUS LED light turns ON
•
Use one of your telephones and unplug the cord for L1/L2 from it and connect it to L1/L2 IN jack on
SX8800, now connect L1/L2 OUT jack to your telephone using the provided phone cord, make sure
you have dial tone on your lines 1 and 2
•
Now unplug the cord for L3/L4 from your phone and connect it to L3/L4 IN jack on SX8800
(the rightmost
jack)
and connect L3/L4 OUT jack on SX8800
(2
nd
jack from right)
to your telephone using the provided
phone cord, make sure you have dial tone on your lines 3 and 4
•
Observe that as you connect the lines the blinking lights turn OFF.
(on non existing lines the lights keep
blinking and that is OK)
•
•
•
•
Alternatively you may use a splitter (T adapter) at the Wall jack to connect both this device and a
telephone
(in that case the L1/L2 OUT and L3/L4 OUT jacks are not connected)
•
•
•
•
Turn the Speaker ON and Adjust the volume to mid level.
L1/L2
IN
L3/L4
IN
L3/L4
OUT
110/240 V
L1 L2
VOLUME TONE
1 2
STATUS
SD Card slot
Please note: just one telephone may be
connected to this device, other telephones
remain connected to their own wall jacks.
L1/L2
OUT
OUTPUT
MODE
INPUT
BANK
1 2 3
12VDC
600
Ω
8
Ω
SD EXT
EXT
1 2 3
3/4
1/2
USB
L3 L4
A B C
A B C
SD Card
OFF ON OFF ON
BASS SPEAKER
Back of SX8800
Front of SX8800
