Goodrive18 series two-in-one VFD Function parameters and function terminal reuse
-52-
Function
code
Name
Description
Default
value
Modify
8
–
10: Reserved
Note:
For setting methods 1 to 7, 100%
corresponds to the rated voltage of the motor.
P04.28
Voltage set
through keypad
This function code is the voltage digital setting
when the voltage setting channel is selected as
"keypad".
Setting range: 0.0%
–100.0%
100.0%
○
P04.29
Voltage
increasing time
Voltage increasing time is the time when the
VFD accelerates from the output minimum
voltage to the output maximum voltage.
Voltage decreasing time is the time when the
VFD decelerates from the output maximum
voltage to the output minimum voltage.
Setting range: 0.0
–3600.0s
5.0s
○
P04.30
Voltage
decreasing time
5.0s
○
P04.31
Max. output
voltage
The function codes are used to set the upper and
lower limits of output voltage.
Vmax
Vmin
Vset
t1
t2
Time t
t1=P04.29
t2=P04.30
Setting range of
–100.0% (of the
motor rated voltage)
Setting range of
: 0.0%
rated voltage)
100.0%
◎
P04.32
Min. output
voltage
0.0%
◎
P04.33
Weakening
coefficient in
constant power
zone
This function code is used to adjust the output
voltage of the VFD in SVPWM mode during
weakening.
Note:
Invalid in the constant torque mode.
Output Voltage
Output frequency f
(P04.33-1.00)*Vb
out
b
Setting range: 1.00
–1.30
1.00
○
P05 Input terminals
Summary of Contents for GD18-004-4-2
Page 1: ......
