6
7
Slide recoiler up through hole in display counter. Use
spacer if needed. Loosely hand tighten cap above
counter onto recoiler.
2
a
Recoiler
Spacer
(For display counters
between 3.175 mm, 0.125”
and 12.7 mm, 0.5” thick.)
Cap
2
b
Rotate recoiler until cut out in recoiler is towards back
of display counter. Fully tighten cap.
Back of
display
counter
Cut out in
recoiler
Recoiler
Front of
display
counter
