Installation
1.
Please make sure the power is off.
2.
Install the fans in your PC case and mount
them in the designated areas.
3.
The fan cable, Addressable RGB Y-Cable and
their counterparts are attached to each fan.
Please connect as follows:
Connect the fan’s Addressable RGB Y-Cable
to a motherboard’s 3-pin addressable RGB
header. Connect the attached fan cable to
the motherboard’s fan header.
Installing the 2nd fan: Connect the
Addressable RGB Y-Cable and connect it to
the available 3-pin Addressable RGB header
on the previous fan. Connect the fan to the
available fan header from the previous fan.
4.
Installing the 3rd fan: Repeat
a
b
c
d
c
d
Motherboard’s 3-pin
addressable RGB header
a
Motherboard’s
Fan Header
b
c
d
2nd fan’s
addressable RGB
Y-Cable
2nd fan’s fan
cable
