Installation
*
If your motherboard does not support an
addressable header, please use the included
Addressable RGB Modular Controller to
connect to your PSU’s SATA cable and the fan’s
Addressable RGB Y-Cable in order to use the 14
different lighting effects.
Hold the button to turn on or off the lights.
Tap the button to change the lighting modes.
1
Rainbow
8
Two-Tone Ring
2
LED-Red Breathing
9
Diagonal Transition
3
LED-Green
10
Rotating LED Trio
4
LED-Blue
11
Full Circle
5
LED-Purple
12
Flow-Red
6
LED-White
13
Flow-Green
7
Light at the end of the
Tunnel
14
Flow-Blue
* InWin reserves the right to change the lighting
modes.
1st fan’s addressable
RGB Y Cable
2nd fan’s addressable
RGB Y Cable
PSU’s
SATA
cable
ARGB One-Click
Controller ver. 1.1
