InWin Cobra IW-RS212-07 User Manual Download

Page: 28 / 29

Q&A

What is the function of the backplane?

A: The backplane is the bridge which connects the hard drives and exports the signal to the

motherboard. Also, the backplane provides the LED signals indicating the status of the hard

drives, and alarming when the system temperature is abnormal.

Does the backplane support 6Gb SAS?

A: The InWin IW-RS212-07 is accommodated with 12Gb SAS backplane by default. The

12Gb SAS connector is not compatible with 6Gb SAS. InWin provides OEM/ODM services,

users may contact their local InWin sales rep for customization.

Does the chassis support 3.5”, 2.5”, SAS and SATA drives? Can I mix the different types

of drives in an enclosure?

A: The InWin IW-RS212-07 supports 3.5” form factor’s SAS/SATA disks. It allows different

types of disks to work together in an enclosure. Yet, to reach the best performance, we

recommend following the motherboard or RAID controller vendors’ instruction deploying

your hard drives to reach the best performance.

Does the chassis support SSDs or flash NVMe drives?

A: Any SSD supports SAS or SATA and 4x NVMe connection can be attached to the InWin

IW-RS212-07. We recommend referencing InWin’s compatibility list to check if your SSD is

listed or referencing the information to purchase SSD.

Does the chassis support mirrored OS disks?

A: The InWin IW-RS212-07 models supports 2-bay 2.5” hot-swap modules. Yet, the disk

mirroring is defined by your motherboard or your RAID 1 controller card. You may check

the vendor’s guide to mirror your OS disks.

Can it support small form factor MB such as M-ATX and Mini-ITX?

A: The InWin IW-RS212-07 supports motherboard range from Mini-ITX to EEB. Unless you

would like to mount a customized motherboard, which will not meet Intel’s standard, you

will need to contact InWin’s partners or sales for customization service.

Do I need a RAID controller card to connect the backplane?

A: If you would like to construct a solid hardware RAID system, it is required. However,

using the RAID controller card or not, depends on your purpose and budget. We

recommend discussing with InWin’s channel partner for their suggestions.

Summary of Contents for Cobra IW-RS212-07






























Search results

Summary of Contents for Cobra IW-RS212-07

Reviews:

Related manuals for Cobra IW-RS212-07

Brands by name

Popular brands

InWin Cobra IW-RS212-07, User Manual

Search results

Summary of Contents for Cobra IW-RS212-07

Reviews:

Related manuals for Cobra IW-RS212-07

Brands by name

Popular brands