13
2.5
Connecting Cables
InWin backplanes (without Expander) are high-performance and cost-effective solutions
for supporting Intel® Xeon Scalable family by adding NVMe support. The passive
backplanes support state-of-the-art SAS3 12Gbps HDD/SSD and are also backward
compatible with SAS 6Gbps, SATA 6Gps and SATA 3Gps HDD/SSD. Some of the backplanes
support NVMe SSDs through either Oculink x 10 or Slimline x 10 connectors.
2.5.1
Connecting Backplane Through SAS Connectors
The InWin IW-RS110-07 needs the SAS cable to connect to the backplane and your
motherboard or RAID controller. InWin provides verified SAS cables for installation,
please contact InWin local partners and sales to get more information.
2.5.2
Connecting LED Cable, Front Control Panel and Front USB I/O Ports
As 1.2.1 describes, the InWin IW-RS110-07 has a built-in front control panel and USB
access ports. To activate these functions, you should connect the pins to the
motherboard. Please refer to the motherboard’s user guide to make sure the pin
functions and their correct locations before attempting to connect them.
USB 3.0
LED Connector
Summary of Contents for IW-RS110-07
Page 3: ...4 Compatibility Lists 18 5 Q A 19 6 Technical Support 20 ...
Page 10: ...7 1 3 General Information When you open the chassis it should reflect the diagram s image ...
Page 14: ...11 650W Single PSU Cable Information Length Unit mm ...
Page 15: ...12 750W Redundant PSU Cable Information Length Unit mm ...