14
※
If the motherboard’s led power source is a 3-pin type, please use the 2-Pin to 3-Pin convertor
adapter from the accessories box to connect.
2.6
Installing the Slide Rail
The InWin IW-RS110-07 is a rackmount model, which supports EIA-RS310D standard
cabinet and chassis racks. InWin provides standard slide rails to allow users to mount the
chassis onto the cabinet.
2.6.1 Identifying the Slide Rail
The slide rail by your order might be different. You can reference the quick installation
guide inside the slide rail package and follow the instructions to mount the rail onto
your cabinet or chassis rack.
2.6.2 Installing the Slide Rail
Step 1: Release the inner rail from the slide.
No.
Connector Name
Color
Front I/O Indication
CN2 ID LED
Red/Black
Chassis ID Button with LED
CN3 System LED
Yellow/Green System Fail LED
CN4 ID Switch
Green/Black Chassis ID Button with LED
CN5 Power LED
Red/Black
Power ON/OFF Button with LED
CN6 LAN LED 1
Red/Black
LAN LED
CN7 HDD LED
Red/Black
HDD Active LED
CN8 Power Switch
Brown/Black Power ON/OFF Button with LED
CN9 Reset Switch
Yellow/Black Power Reset Button with LED
CN10 LAN LED 2
Red/Black
LAN LED
CN11 NMI Switch
Blue/Black
NMI Button
USB USB 3.0 Connector
Black Flat
USB 3.0
Summary of Contents for IW-RS110-07
Page 3: ...4 Compatibility Lists 18 5 Q A 19 6 Technical Support 20 ...
Page 10: ...7 1 3 General Information When you open the chassis it should reflect the diagram s image ...
Page 14: ...11 650W Single PSU Cable Information Length Unit mm ...
Page 15: ...12 750W Redundant PSU Cable Information Length Unit mm ...